Sunday, January 27, 2008

Cloverfield, the movie review

Well, after seeing the previews of Cloverfield, I thought it would be a worthwhile movie to watch. I rarely go out to see movies nowadays. The price of a movie ticket is unjustifiable for me because a lot of new movies are hit or miss. Why would I want to pay $10 to watch a movie that looks good in the previews, but end up sucking some way or another?

Anyway, I went and watch it thinking it would be a good scary movie. My review in two words: not-scary and nauseating. That's 4 words, but two thoughts. So, the word on the street was that the movie was a scary thriller. I'll tell you right now, Alien (or Aliens) it's not. I had no sense of fear or suspense at any point during the movie. The only thing I felt was nauseous. The Handycam recording with the constant hand shaking movement of the camera made me feel very sick, and ended up moving back a few rows (pretty much to the last row) from the optimal mid-section seats to try and quell that motion sickness feeling. I was hoping the hand motion would stop soon, but it never did. The only time it did was when the camera was dropped on the floor, at which point I felt relieved the moving stopped.

In terms of the plot, I just don't get it. Why is it that this "thing" seems to be everywhere the lead characters go? I would think it would move away from the fighting, but alas, the typical bad story writing continues with this movie. They could have made the movie a lot more interesting if it was filmed normally too. It felt like any First Person Shooter (FPS) intro that's come out since Half-Life, where you're watching from the first person perspective an event occurring, which obviously was the intent of the director. But unless you play FPS' and enjoy that type of cinematography, you'll not only feel sick, but distracted because it just seems too hard to believe the story.

Hopefully, I didn't give away any spoilers, but my recommendation on this movie is if you enjoy playing FPS games and have a strong stomach, enjoy it as if it was a really long intro to a FPS game. Otherwise, I recommend you skip it, unless you like that type of movie. If so, you might consider taking some dramamine beforehand.

Roomba 570 ordered (and returned)!

Well, after getting tired of cleaning up the floor from crumbs and other tiny particles from the kids, I decided to order the Roomba 570 in the hopes that it'll help keep the floor clean. I'm tired of vacuuming every few days, having to pull it out, plug it in, clean, then put it all away again. But I really hate walking barefoot onto a crumb or piece of food dropped on the floor!

I decided to buy it from Hammacher for the lifetime warranty. It was about $50 cheaper on Amazon, but for that price, I think the lifetime warranty will be worth it, especially for a vacuum cleaner that'll probably run almost every day, unless it's too noisy. I'm hoping to have it clean in the early morning or middle of the night, depending on how loud it is and how long it takes to clean the rooms.

Hope it works out, or it'll be another vacuum cleaner I've bought that won't get used much. I'm still looking for that perfect floor cleaner with minimal work!

Update:

I returned the Roomba. After a couple of days using it, I realized it's not a vacuum cleaner, but rather a "robotic" sweeper. I say "robotic" because the default program isn't very smart. I'd say it's more like a rat in a maze. It takes a long time to clean an area, you need virtual walls to keep it within a room before moving to the next, and it doesn't pick up materials very well. The sweeper gets lint and sheddings stuck on the bristles, and instead of sucking it up, it just gets stuck and if it runs over something else, the stuck lint just comes off on the floor. Since it didn't do a very good job of cleaning the floor as I had hoped, I decided it wasn't even worth keeping.

Saturday, January 26, 2008

Exchange 2007 to 2003 mailbox move failing

Tried to move to Exchange 2007, but web access doesn't work using the Exchange virtual directory. Not thinking ahead, I already started to move some mailboxes over from 2003 to 2007 before I had done a backup and such. This always leads to trouble for me. When the Exchange OWA virtual directory wouldn't work, I decided to wait to migrate, which meant I'd have to move back those mailboxes I already moved. Unfortunately, as luck would have it, moving the boss' mailbox back kept failing! His was the only one too. Couldn't understand why it was failing during the move so I was desperate trying to figure out how to move it back so his ActiveSync would work again.

Turns out having Outlook open was causing the failure. Maybe it's because he's running Vista, but closing Outlook allowed the move to succeed. I assumed Exchange would take the mailbox offline before doing the move, but I guess it doesn't.

Tuesday, January 22, 2008

Roomba Deal

I've wanted to get a Roomba vacuum cleaner for a while now, but just don't want to spent the money after having bought a Miele canister vac. I'll eventually get one, but not right now. When I do, get it from here:

Hammacher Roomba Deal

They have lifetime warranty on their products that they sell. Roomba normally only comes with 1 year warranty, which I think sucks for a vacuum cleaner.

Is the lifetime warranty worth the $130-$160 premium? Maybe not. I'll have to decide that when the time comes.

WAN data optimization

I just read about a product that helps optimize WAN data so that site-to-site communications is reduced or sped up, saving money and time.

Riverbed

If/when the need arises, I'll have to look into their product line.

Saturday, January 19, 2008

Jusched.exe doesn't quit in VM

I have a Windows VM and every time I shutdown, the application jusched.exe doesn't quit. I have to end the process to continue the shutdown. Turns out, jusched.exe is the Java Update check scheduler. I found a link that I thought was a smart way to get rid of that program from running in the background, yet keeping the update checker checking.

Java Updater via Task Scheduler

Stop the Java update checker from checking via the Java control panel.

Then create a Windows scheduled task that runs the jucheck.exe update checker every month. That way, the system task scheduler, which has to run, won't waste system resources, but you still can check for updates when you want it to.

This setup also got rid of the hanging jusched.exe problem when shutting down my VM.

Friday, January 18, 2008

A computer that follows you throughout your house!

With multiple computers in my house, it's always been a desire for me to be able to stop what I'm doing, go to another computer, and continue on. I've been doing that by saving and reloading on another computer, or I'll remote desktop in to continue. But with USB flash memory sticks getting bigger and bigger, it's now possible to carry my computer setup with me to any other computer in my home!

By using a 16 or 32 GB USB memory stick (actually, any large portable memory device would work like a hard drive, iPod, SD Memory card, etc. The faster the better), I can create a virtual machine system on that flash memory stick! On each of the host computer, install VMWare's free Server virtual machine software (on the Mac, install Fusion). Create a virtual computer and save the files onto the memory stick. Once the system is configured the way you want, you now have a virtual machine you can start up and continue to work on from any other computer in the house! Instead of shutting down the virtual computer, just pause it in the VM to put it to sleep. It'll save your last state onto the flash memory stick so that when you start it up again on another computer, it'll start where you left off.

Because flash memory is much slower than regular memory or even hard drives, and because your memory stick probably doesn't have that much more space after the OS and your applications, you should create a shared folder on a fixed system and in the virtual machine, map a drive to that shared folder. Now you can save any and all data from your applications on the shared drive instead of the flash drive! If you need to take the data/file with you, just drag a copy onto the virtual machine's desktop.

Ingenious and free (except the memory stick)!

The biggest limitation of this setup right now is you can't play 3D games or games that require hardware acceleration. Hopefully VMWare will create a virtual DirectX layer like they're doing with the Mac version in Fusion. When that is fully compatible, even taking games with you from one computer to another will be possible.

I also recommend you stock up on memory for each of your host computer. Memory is cheap, and the more you have the better, even if you don't plan to use them as virtual machine hosts.

New RO Tank

I have to replace my Reverse Osmosis reservoir tank because it's starting to rust/corrode. I found this as a nice replacement:

Flowmatic RO Pro bladder tank

It's not metal on the outside, so it should last a lot longer and it's not that expensive, compared to the steel ones.

Thursday, January 17, 2008

How to remove Microsoft's Messenger IM

I never use Microsoft's Messenger IM client, so I always want to remove it. Here's a link explaining how to do that.

Remove MSN Messenger

If you want to remove MSN Messenger from Windows XP and can't seem to find it in the Add/Remove Programs. You need to edit one file to have it displayed in Add/Remove Programs. There is a couple ways to uninstall MSN Messenger. One way is to run this command from Start | Run.

RunDll32 advpack.dll,LaunchINFSection %windir%\inf\msmsgs.inf,BLC.Remove


Another way
Search for sysoc.inf. It should be located in the C:\windows\inf\
Edit the file with notepad.
Remove the word hide. Save the changes.
Open Add/Remove Software.
Click on Add/Remove Windows Components and you can remove MSN Messenger. There is two services to remove everything.
You can now remove both services. They have a bug with the check boxes but it still works.

Wednesday, January 16, 2008

Save money on Epson Ink!

I bought myself the Epson R280 and RX595 color ink jet printers to be able to print photos, print direct-to-disc labels, and just for documents. I bought both cause they were pretty cheap for the pair and because I planned to do something interesting with one of them.

The RX595 is a multi-function printer. It can scan, copy, and print. I plan to scan all my old photos pre-digital camera into my server, but also use it to print high quality prints using the Epson Claria ink.

I bought a R280 for cheap (wish I could have gotten for free after rebate, but didn't know about it) to put besides my new iMac. I wanted to use it as an everyday printer for the kids and wife. However, at $18 per ink cartridge, I didn't want to use it with the OEM cartridges. So I bought myself a Continuous Ink System, "CIS" for short. I bought a kit from InkRepublic.com because others mentioned them as a good, reliable vendor for a quality kit. The kit allows you to use ink bottles instead of cartridges. The benefit is lower cost of ink and no more throwing away/shipping back used ink cartridges, or buying messy refill kits or "compatible" cartridges. With this system, I can just keep buying bottles of any ink that's out, without messing with the printer at all! So far, I've made plenty of photo prints, full page prints, documents, etc., and still only used maybe 1/5th of the ink bottle that came with the kit. The colors aren't as nice as the Epson Claria ink, but that's why I have the RX595! With the CIS kit, you have to modify the cartridge holder permanently, which is why I chose to do it on the cheaper R280 printer (bought mine for only $45). I really like the kit, and the feeling that I don't have to worry about printing on it for fear of having to spend $18 to replace just ONE cartridge. A full set of 6 Claria ink cartridges will set you back almost $70-80! With the CIS set, it only costs $30-$60 for 6 4 ounce bottles, depending on vendor and quality. In case you don't know, 4 ounces is equivalent to around 6 cartridges, which translates to around $100-120, just for 1 color!

So far, I like the kit from InkRepublic a lot! I'm glad I overcame my fear of "breaking" a perfectly new printer.

Pearl 8100 full body protection

I bought something similar to this for my Pearl 8100. It's a clear film protector that covers the face and back so that I can put it in my pocket and not worry about something scratching it. This company seems to have a film set that covers even the sides of the phone, as well as kits for other phones. I like this full-body skin protection much better than a case. They're not cheap, but I think worth the price!

Bodyguardz.com

Photodon iMac anti-glare screen film review

I have a 20" core 2 duo iMac setup in my kitchen. However, the screen is sooo shiny and glossy, it's hard to read in the morning due to the sunlight reflecting off the screen. So I did a Google search and found this:

Photodon.com

It's a custom sized anti-glare film for the iMac! They have a 20" and 24" version, anti-glare and clear. They both work as a screen protector as well, which is perfect since the whole family likes to touch the screen as they point, or the kids forget to cover their mouth when they sneeze.

Today, I installed the film on the screen per the directions. It was tough keeping the lint and dust off, but I just angled the screen down to minimize falling lint/dust from landing. I used the included wiping cloth with a bit of windex squirted on a corner to clean the screen off. Pulled the plastic film off the anti-glare film an inch at the top, applied it, and then pull the plastic film half way. Otherwise, the silicon adhesive wouldn't stick. I don't think the adhesive is either sufficient or "sticky" enough. More on that issue later.

My impression of the anti-glare film is that it isn't perfect. I was hoping to have a film that cuts a lot of the reflection without reducing visibility, but alas, there's still bright spots on the screen, just not as bright or focused. It also cut the brightness by 10-15% which isn't that big a deal since the max brightness is way too bright to begin with. There's also the "sparkles" typical of diffusers, which makes the whole screen look like it has water streaks. This is the most annoying part of the film. The other problem I have with it is that the edges don't cling to the screen. There's edge "bubbling" so to speak where it's not completely affixed to the screen. I can live with it, since it's in the black bezel area, but it tells me the silicon adhesive isn't sufficient. I have other silicon adhesive backed films on my phones and such, but I haven't had this issue with those.

Overall, I'll keep it just to protect the screen, but hopefully a better anti-glare film will be available sooner rather than later by Photodon or someone else. At least it'll help with the fingerprint clean up and potential scratches from pens and other things the kids use to point on the screen.

Cisco IP Phone - 2821 Router - Update CF Card

I replaced the 64 MB CF Card in our 2821 router with a 256 MB CF Card. First of all, I had a heck of a time finding a 256 MB CF Card, which is the largest card you can put in this box. Anyway, after I transfered the files from my 64 MB card to the 256 MB card, everything booted fine, but now I can't access SDM or CCME admin page! I have no problems with Unity Express admin pages, though. I haven't had time to troubleshoot it, but I really don't know where to start, or what's cause it. I can still use the IOS command line to configure, but I sure miss using the web interface. Gotta fix this soon.

Update:
Found the problem. The files were not named with matching case. Since IOS seems to be a type of Unix variety, all the file names are case sensitive. Once I fixed that, all the web admin files worked again.

MAME and 68000 games not working

Tried to run a 68000-based game in latest MAME, but after loading the roms, kept kicking back out to the menu. Turns out, I had the 68000 code to ASM instead of C. I guess there's issues with the ASM version of the 68000 emulator. Switching it to the C version allowed the games to run again. Yay!

Microsoft Office 2003 SP3

Installed SP3, and now all excel workbooks open up with the macro security at high. This was done because apparently there's a vulnerability that hasn't been fixed yet in macros across the Office spectrum! The annoying thing is, it no longer seems to be a global setting, but rather a per-workbook setting! We have tons of workbooks that we work with everyday, but to have to keep changing that setting for each workbook post SP3 is quite annoying. Not only do you have to open, change the setting, then save it and reopen it, but you have to do it for every book that hasn't had this done to it yet! Ugh! I understand why they did it, but it would be nice if the Microsoft Updates had some type of "Readme" within the automatic updater before (or after if auto-updating) it applies them so that people can prepare for these things.

Lost lego pieces

My kids received quite a few Lego Star Wars kits in the past year. However, because they're kids, they've lost quite a few pieces as well. I just assumed once pieces are lost, you had to buy the whole kit again. Turns out that's not the case. Lego's website has a customer service page where you can purchase lost or missing pieces. The website lets you add to their shopping cart any set of pieces that comes in a given kit based on the kit model number. Afterwards, you give them your mailing address and submit. A day or two later, you'll get an email with a price for all the pieces you wanted, including whether some are not available. I tried to order the pieces to a Boba Fett figure, but was required to give proof of ownership, which I didn't have. So, I guess I'll have to try to find the kit instead. Oh well.

Excel 2003 Tip

I was asked by a coworker how to show the formulas in all cells within Excel 2003 rather than the calculated value.

The answer is to hit CTRL-`. This puts you in Formula Audit mode.

OS X 10.5.1 stopped loading at blue screen

After doing a system update on my OS X Leopard iMac, it rebooted and got stuck in the blue screen at boot. The mouse works, but nothing was happening.

Turns out, prior to rebooting, I had installed APE, which others had found causes this issue.

The solution was given by apple's troubleshooting pages:
Mac OS X 10.5: "Blue screen" appears after installing Leopard and restarting

In case the link dies, here is the portion that I used:

Issue or symptom

After completing an upgrade installation of Leopard and restarting the computer, a "blue screen" may appear for an extended period of time.

Products affected

  • Mac OS X 10.5 Leopard

Solution

You may have third-party "enhancement" software installed that does not work with Mac OS X 10.5 Leopard. Use one of these solutions.

Option A: Use another Mac to remove application enhancement software

If you have a second Mac that has a FireWire port (even if it's not running Leopard), and a FireWire cable that you can connect to both computers, use this solution:

  1. Start your original, affected computer in Target Disk Mode by holding the T key, and connect it to your second computer. Your affected computer's hard disk volume(s) should appear on the desktop of the second computer.
  2. Open the second computer's mounted disk volume (where Leopard is installed), then open the System folder, then the Library folder, and finally the SystemConfiguration folder.
  3. Locate "ApplicationEnhancer.bundle" and move it to the Trash. Important: Do not delete any other files from your Leopard disk.
  4. Enter an admin account name and password if prompted.
  5. Eject the mounted volume(s). (Disconnect the FireWire cable if you want).
  6. Turn off the original computer and start it up again (holding no keys).

If the issue persists, or if the "ApplicationEnhancer.bundle" file was not on your Leopard volume, use Option B.

Option B: Reinstall Leopard

If you can't use option A, it may be necessary to perform an Archive and Install installation of Leopard. Archive and Install moves your existing Mac OS X system files to a folder named Previous System, and then installs a new copy of Mac OS X on the selected volume. Mac OS X–installed applications, such as Address Book and Safari, are archived, and new versions are installed in the Applications folder. Applications, plug-ins, and other software may have to be reinstalled after an "Archive and Install." This is covered on page 7 of the Install & Setup Guide included on the Leopard DVD.

You will probably want to check "Preserve user and network settings" when starting the installation.

Note: After installation, verify each third-party software product is compatible with Leopard before reinstalling it, especially any application "enhancement" software.

Option C: Use the command line (advanced) to remove application enhancement software

Try this solution if you are comfortable using Terminal and have certain application enhancement installed. The software may be removed following the below steps:

  1. Start up in single-user mode by holding Command-S after restarting the computer. Note that single-user mode always uses the US English keyboard layout.

  2. Type these commands, each on a single line followed by Return:

    /sbin/fsck -fy
    /sbin/mount -uw /
    rm -rf /System/Library/SystemConfiguration/ApplicationEnhancer.bundle
    reboot


  3. If the issue persists, use option A or B above.

First post

As a technology guy, I'm always tinkering and fixing and upgrading and what-not. Over the years, I've created, broken, trouble-shot, and fixed lots of problems and issue, but never kept a log of the solutions to problems. I decided I better start logging any and all issues I run into, because it seems I keep running into them after my mind has blanked out what the solution was. Hopefully, I'll be able to record all my solutions to problems I encounter through this blog.